The Method Of Brushless Motor Not Turning

　　Brushless motors can run normally after starting up. Motors are still widely used in many industries. When encountering problems, we must pay attention to solving them from different angles.

　　1. When the two brushless motors do not rotate, the power circuit should be considered. The control signal input circuit and the problem of the motor circuit can be ruled out.

　　2. The power supply problem is also relatively simple. There is no problem if the power supply V+ and V- of a group of drives are cut off.

　　3. The line problem is more complicated, check the line, and deal with it in time if any abnormality is found.

　　4. The signal problem is more complicated, but there is less chance that there are no two pulses. If one pulse controls two drivers, such problems are more common, but few people use it this way. So we should pay attention to repairing the driver part of the brushless motor.

　　5. Emergency stop switch problem. If the emergency stop switch is broken, the motor will not move. At this time, the emergency stop switch can be replaced.

　　When using a brushless motor, if you encounter a situation where it cannot rotate, you can refer to the above solutions.